Mining work in tight tunnels needs special tools to keep things running well and safe. One key machine is the underground pick scaler. It helps keep tunnels strong and protects people. These machines use fluid power to knock off loose stones. This stops caves from falling in. So, mining can go on without big risks. In this post, we look at how an underground pick scaler runs, why it matters in mining, and the special parts that make it a must-have in modern mines.
What is an Underground Pick Scaler?
An underground pick scaler is an important tool in mining. Workers use it to scrape away loose stones or junk from tunnel sides. This stops risky falls of rocks. These tools often show up in tough rock mining spots. There, keeping safe comes first, and steady tunnels are key.
The main job of the scaler is to keep tunnels solid. It does this by pulling off shaky rocks that might hurt folks. The tools work with a fluid-powered hit tool or spike. This spike sits on a robot-like arm. The arm lets the scaler touch high tops and sides in tunnels. It knocks off bad rocks from a safe spot.
Underground pick scalers deal with hard spots thanks to their strong build and new tech. They fit the tough needs of deep mining jobs.
How Does an Underground Pick Scaler Work?
To understand the tool better, let’s break down its main parts and how it runs.
The Hydraulic System
Underground pick scalers run mostly on fluid systems. These systems give power to the hit tool or spike for scraping. A strong motor runs the fluid setup. This lets the machine do its job well in small, hard places. The fluid system moves the arm. Workers design this arm to hit high, slim, or tricky spots in deep tunnels.
The hit tool or spike does the main task. When the scaler sits in place, the hit tool starts. It hits the rock side. This push makes loose junk break off and drop down. Then, folks can clear it away without danger. Fluid scalers come in different sizes. It depends on tunnel space and how much junk needs clearing.
Moving on, the special traits of these tools make them stand out in mining.
Key Features of Underground Pick Scalers
These machines pack a lot of useful traits for daily use.
Powerful Engine: The motor in an underground pick scaler often goes from 54kW to 86.5kW. It changes with the type. This gives enough push to handle rough mining spots.
High Mobility: Folks build these tools with a small turn circle. This helps them move easy in tight tunnels. The small size of pick scalers lets them slip through narrow paths where big tools can’t go.
Adjustable Reach: The fluid arm of a pick scaler changes length. It can stretch out or pull back. This helps reach tough parts of the tunnel, like high tops or slanted sides.
Safety Features: Pick scalers have safety setups, like bump-soaking parts and far-away controls. These cut risks for drivers. Some types have closed rooms. This boosts safety from dropping junk.
The Importance of Underground Pick Scalers in Mining
These tools play a big part in making mining better overall. Let’s see why they matter so much.
Enhancing Safety
Keeping workers safe is the top thing in deep mining. Pick scalers help a lot in making a safe place to work. Loose stones in tunnels can cause big problems. They might lead to hurts or worse. By pulling these stones off before they drop, pick scalers stop bad events. This makes them a key part for mine safety.
Beyond safety, these machines also help get more done in less time.
Increasing Efficiency
Along with safety, underground pick scalers boost how well mining runs. They clear junk fast and keep tunnels steady. This lets workers keep going without stops. They cut time lost on hand scraping. Hand work can be risky and slow.
With traits like easy movement and strong fluid systems, pick scalers do jobs quick and good. This lowers breaks in the mining flow. Their skill to scrape big tunnel parts in short time is a main reason for better work flow.
Also, these tools work well in many setups.
Versatility in Various Mining Conditions
Pick scalers fit many tunnel kinds, like slim, tall, or steep ones. This makes them good for lots of mining spots. They work in coal digs, metal digs, and tunnels for power plants or roads.
Types of Underground Pick Scalers
Different power sources make these tools suit various needs. Here’s a look at common kinds.
Diesel-Powered Scalers
Diesel-powered pick scalers show up a lot in mining. They run well in far-off and deep spots. These tools are known for strong work and long life. This fits the hard setups of deep tunnels. Diesel motors give big pull and trust, even in tough spots.
On the other hand, newer options focus on being kinder to nature.
Electric-Powered Scalers
Electric-powered pick scalers are getting more common. They harm the air less and need less fixing. These types have electric motors. They run quiet and clean compared to diesel ones. Electric pick scalers help a lot in spots where clean air matters.
Common Features of Modern Underground Pick Scalers
Today’s tools share some key parts that make them effective.
Hydraulic Hammer or Pick: The main part of any underground pick scaler is its fluid hit tool or spike. It gives the push to break loose junk from tunnel sides.
Remote Operation: Lots of new pick scalers let folks run them from far away. This keeps drivers safe in bad spots.
Adjustable Arm Length and Reach: The fluid arm of a pick scaler changes fully. This lets it scrape tunnels of different sizes and hit hard spots like tops and sides.
Compact Design: Folks make pick scalers small and easy to steer. This makes them perfect for slim tunnels with little room.
Brand Introduction: Yantai Chi Hong Machinery Co., Ltd.
Yantai Chi Hong Machinery Co., Ltd. is a top supplier of underground pick scalers. They provide good mining equipment for safe and quick underground work. With many years in the mining machinery field, Chi Hong works hard to offer new ideas that fit the tough needs of current mining spots.
This company focuses on giving strong and dependable tools. These tools help boost work speed, safety, and output in underground mining.
Their underground pick scalers come with better hydraulic setups, strong engines, and changeable parts. So, they can deal with hard spots while keeping operators and workers safe.
Yantai Chi Hong Machineryโs focus on quality and happy customers has turned it into a trusted friend for mining firms around the world. They keep putting money into research and growth. As a result, their products stay ahead in the field. They offer mining fixes that match new tech and safety rules.
Conclusion
Underground pick scalers are a must in mining work. They keep things safe and get more done. Their fluid systems, strong motors, and easy movement let them pull off bad stones and junk from tunnels well. This stops bad events and lets mining go on without breaks. With new tech like far-away running and electric types, the future of deep scraping looks good. It offers even better and greener ways.
FAQs
What is an underground pick scaler used for in mining?
Underground pick scalers pull off loose stones and junk from tunnel sides. This stops risky rock drops. It makes a safer spot for workers and boosts mining flow.
How does an underground pick scaler operate?
An underground pick scaler uses a fluid hit tool or spike. A strong motor powers it to knock off loose stones from tunnel sides. The fluid setup gives the push for good work in small spaces.
What are the advantages of using an electric-powered pick scaler?
Electric-powered pick scalers run quiet. They make less dirty air and need less fixing than diesel types. This makes them good for spots where clean work matters.
What safety features do underground pick scalers have?
New pick scalers have bump-soaking setups, far-away controls, and closed rooms. These protect drivers from risks in mining spots.
How does an underground pick scaler improve mining productivity?
It clears loose junk quick and good. This stops delays from rock drops and keeps tunnels steady. So, mining work goes on smooth without breaks.
English 
Chinese 
Russian 
Spanish